Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Greta Moore

Bearbeitung genehmigt von Greta Moore

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* blackviolet] Before removing the circuit board, we must remove the ribbon-like wires attached to two sides of the circuit board.
[* red] There are two screws (Phillips #000, 2.0 mm long) holding in the circuit board. Use a Phillips #000 screwdriver to take out those screws.
[* blackviolet] Before removing the circuit board, we must remove the ribbon-like wires attached to two sides of the circuit board.
[* red] There are two screws (Phillips #000, 2.0 mm long) holding in the circuit board. Use a Phillips #000 screwdriver to take out those screws.

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version

Bild 3

Kein vorheriges Bild

Hinzugefügt