Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 7

Bearbeitet von Marty Rippens

Bearbeitung genehmigt von Marty Rippens

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* blackred] Touch the hot soldering iron to the solder in the lower left corner connecting the logic board to the red wire.
[* blackred] Touch the hot soldering iron to the solder in the lower left corner connecting the logic board to the red wire.
[* black] When the solder has completely melted, gently pull the wire free from the logic board.
[* black] Repeat for the red, blue, and then black wires.

Bild 1

Alte Version

Neue Version