Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von iRobot -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

+[* icon_note] If you have already removed the hard drive or speaker assembly, your computer may differ slightly from the images in this section. These parts do not affect this procedure.
+[* black] Remove the following 7 Phillips screws attaching the heat sink to the metal framework:
+ [* red] Five 5 mm screws scattered around the heat sink.
+ [* orange] One 6 mm on the front left corner of the heat sink.
+ [* yellow] One 10 mm in the back left corner of the left fan.

Bild 1

Kein vorheriges Bild

Hinzugefügt