Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Elohino Theodore -

Bearbeitung genehmigt von Elohino Theodore

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Remove the rubber inserts with the spudger.spudger./'''Make this picture a close up view. '''
[* icon_note] When reassembling notice the two lower rubber pieces are flatter than the four upper rubber pieces.pieces./'''Note: When reassembling, notice that the two lower rubber pieces are flatter than the four rubber pieces located upwards.'''/'''Also make this notice a different color.'''
[* red] Remove the screws behind the rubber inserts with the phillips #00 screwdriver.screwdriver./'''No edits are needed for this step.'''
[* red] Remove the rubber inserts with the spudger.spudger./'''Make this picture a close up view. '''
[* icon_note] When reassembling notice the two lower rubber pieces are flatter than the four upper rubber pieces.pieces./'''Note: When reassembling, notice that the two lower rubber pieces are flatter than the four rubber pieces located upwards.'''/'''Also make this notice a different color.'''
[* red] Remove the screws behind the rubber inserts with the phillips #00 screwdriver.screwdriver./'''No edits are needed for this step.'''