Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von William Sanders -

Bearbeitung genehmigt von William Sanders

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Use the Phillips #00 screwdriver to loosen and remove the screw holding the inner headphone cover in place.
[* icon_note] ForThe screw dimensions please referare as follows: Length to the [[Topic:Kensington Hi-Fi Headphones 33137|Kensington Hi-Fi Headphones 33137 Device Page]]Head = 4 mm, Head Length = 1.5 mm, Head Diameter = 3.5 mm, Major Diameter = 2 mm, Pitch = 0.5 mm.
[* icon_note] ForThe screw dimensions please referare as follows: Length to the [[Topic:Kensington Hi-Fi Headphones 33137|Kensington Hi-Fi Headphones 33137 Device Page]]Head = 4 mm, Head Length = 1.5 mm, Head Diameter = 3.5 mm, Major Diameter = 2 mm, Pitch = 0.5 mm.
[* icon_note] All steps can be followed on both the left or right side of the headphones to remove inner coverings.