Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 5

Bearbeitet von William Sanders -

Bearbeitung genehmigt von William Sanders



[* black] Use the screwdriver to pry the inner headband covering loose.
[* icon_caution] WARNING: Do not push the inner covering panel too hard, or the plastic will break. Only apply enough pressure to lift the panel up slightly.
[* black] Once the inner covering is loose, pull it free from the headband with your fingers and set it aside.
[* icon_note] All steps can be followed on either the left or right arm of the headphones to remove inner coverings.