Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 3

Bearbeitet von Taggart Ashby

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Desolder the upper points.
[*

[*
black] Loosen top boardThere is a large solder point in the upper right.
[* black] There is a series of soldering points in a rectangular area in the middle of the camera.
[* black] Turn the camera over.
[*
black] Pry the capacitor out of its holder on the bottom holderof the camera. This can be done with your fingers.
[* black] Remove the lens assembly with your fingers.
[* black] You may need to wiggle it back and forth until it comes loose.
[* black] Desolder the upper points.
[*

[*
black] Loosen top boardThere is a large solder point in the upper right.
[* black] There is a series of soldering points in a rectangular area in the middle of the camera.
[* black] Turn the camera over.
[*
black] Pry the capacitor out of its holder on the bottom holderof the camera. This can be done with your fingers.
[* black] Remove the lens assembly with your fingers.
[* black] You may need to wiggle it back and forth until it comes loose.