Änderungen an Schritt Nr. 3
Schritt-Zeilen
| [* black] Leave the camera facing down and locate the ribbon connector. The ribbon connector is placed bellow the main button panel on the bottom right side of the camera. | |
| - | [* red] Lift the main button panel and gently hold the ribbon connector with the black tweezers. |
| + | [* red] Lift the main button panel and gently hold the ribbon connector with the black [product|IF145-020|tweezers]. |
| [* icon_caution] While lifting and removing the ribbon connector with the tweezers make sure to not break the ribbon or the connection located on the bottom end of the ribbon. Remove the lower portion of the ribbon by using a spudger. You will be needing the ribbon connection to reassemble your device. | |
| [* red] Once the ribbon has been entirely disconnected, lift the entire panel and place it above it's original positions. The panel will not be entirely removed only the lower half. |