Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 1

Bearbeitet von Andy Maness -

Bearbeitung genehmigt von Andy Maness

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] There are two "safety belt" tabs that need to be taken off in order to remove the digitizer.
[* red] One is attached to the camera, located at the top of the Gear, and the other is located on the left side.
[* black] To remove, use tweezers to grab the metal plate.
[* black] Lift
and then gently lift up to remove the metal plate.
[* black] To remove, use tweezers to grab the metal plate.
[* black] Lift
and then gently lift up to remove the metal plate.
[* icon_caution] When removing the metal plates, be sure to remove them carefully as to not rip the orange tape that is attached to them.
[* icon_reminder] During reassembly, be sure to line up the pins of the metal plate in order to reattach correctly.