Änderungen an Schritt Nr. 1
Bearbeitet von Devin Mast -
Bearbeitung genehmigt von Devin Mast
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] There are two "safety belt" tabs that need to be taken off in order to remove the |
| [* black] There are two "safety belt" tabs that need to be taken off in order to remove the |
| [* red] One is attached to the camera, located at the top of the Gear, and the other is located on the left side. |
| [* black] To remove, use tweezers to grab and then gently lift up the metal plate. |
| [* icon_caution] When removing the metal plates, be sure to remove them carefully as to not rip the orange tape that is attached to them. |
| [* icon_reminder] During reassembly, be sure to line up the pins of the metal plate in order to reattach correctly. |