Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Kyle Libby

Bearbeitung genehmigt von Kyle Libby

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Locate the 4 screws and cable that hold in the two speakers.
[* yellowred] use the Phillips #1 screwdriver to remove these screws.
[* yellowred] use the Phillips #1 screwdriver to remove these screws.
[* icon_note] Not all 4 screws are going to be the same kind. This will not affect the speaker replacement.
[* greenorange] Connector Cable
[* greenorange] Connector Cable

Bild 1

Alte Version

Neue Version