Skip to main content

Änderungen an Schritt Nr. 1

Bearbeitet von Ethan

Bearbeitung genehmigt von Ethan

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Locate the 4 screws and cable that hold in the two speakers.
[* red] useUse the Phillips #1 screwdriver to remove these 2mm black screws.
[* orange] Remove the 2mm silver
screws.
[* red] useUse the Phillips #1 screwdriver to remove these 2mm black screws.
[* orange] Remove the 2mm silver
screws.
[* icon_note] Not all 4 screws are going to be the same kind. This will not affect the speaker replacement.
[* orangeyellow] Connector Cable
[* orangeyellow] Connector Cable

Bild 1

Alte Version

Neue Version