Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von David Hoyt -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* red] Remove the panels fromUnscrew the two memory panel screws and set the heat sink with the Phillips screwdriver and set thempanel aside.
[* icon_note] Be careful withIgnore the removal of the heatsink, as this canheatsink panel. This does not need to be messy if handled improperly. It is a copper heat piperemoved for RAM module access.
[* red] Remove the panels fromUnscrew the two memory panel screws and set the heat sink with the Phillips screwdriver and set thempanel aside.
[* icon_note] Be careful withIgnore the removal of the heatsink, as this canheatsink panel. This does not need to be messy if handled improperly. It is a copper heat piperemoved for RAM module access.

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version

Bild 3

Gelöscht