Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 1

Bearbeitet von Ashley Carlson -

Bearbeitung genehmigt von Ashley Carlson

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Remove the RAM cover panel screws withUse a #1 Phillips head screwdriver to remove the screws on the RAM's cover panel, as indicatedseen in the picture, thenimage.
[* black] Then,
use a flat edge tool to pry the cover offoff, as seen in image.
[* black] UsingUse your fingers,fingers to push the RAM tabstabs, as seen in image, that secure the RAM tabs outward (away from the RAM). The RAM should then pop upup.
[* black] Finally
, gently removepull the RAM pulling away from the connection. (ContinueRepeat this process until all the RAM has been removed from the device).
[* black] Remove the RAM cover panel screws withUse a #1 Phillips head screwdriver to remove the screws on the RAM's cover panel, as indicatedseen in the picture, thenimage.
[* black] Then,
use a flat edge tool to pry the cover offoff, as seen in image.
[* black] UsingUse your fingers,fingers to push the RAM tabstabs, as seen in image, that secure the RAM tabs outward (away from the RAM). The RAM should then pop upup.
[* black] Finally
, gently removepull the RAM pulling away from the connection. (ContinueRepeat this process until all the RAM has been removed from the device).

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version

Bild 3

Alte Version

Neue Version