Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von David Smout -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Use a #1 Phillips to remove the two screws attaching the right side of the hard drive to the plastic framework. You'll need to angle the screwdriver down to get access to the lower right screwscrew or remove the tape covering the access hole opposite this screw, remember to put the tape back as this will affect the airflow for cooling. Be sure to apply steady force to the screws and turn slowly so as not to strip them.
[* black] Use a #1 Phillips to remove the two screws attaching the right side of the hard drive to the plastic framework. You'll need to angle the screwdriver down to get access to the lower right screwscrew or remove the tape covering the access hole opposite this screw, remember to put the tape back as this will affect the airflow for cooling. Be sure to apply steady force to the screws and turn slowly so as not to strip them.