Änderungen an Schritt Nr. 3
Bearbeitet von iRobot -
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* icon_caution] The cable you're about to remove is very fragile - do not pull directly on the wires. Instead, try to pry up the connector directly, using your fingernails or a small flathead screwdriver if necessary. |
| [* black] Disconnect the speaker connector from the interface board. |
| [* black] Pull the speaker out from the plastic framework. |
Bild 1
Kein vorheriges Bild
Hinzugefügt