Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von lf -

Bearbeitung genehmigt von Sam Goldheart

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Remove blades and accessories
[* black] On the trimmer sidePushing with your thumb (pic1), pop the trimmer blade back then remove the screws, carefully wedgeopen it on its hinge. Remove the two steel screws (pic2). The metal piece up that was under the 2 screws(Shown in the center of the photo). The trimmer piece shouldclip can now slide out. You may also want to pullme levered off the blade from the other side but it is not required. Proceed to step 2using a thin screw driver (pic3).
[* black] On the trimmer sidePushing with your thumb (pic1), pop the trimmer blade back then remove the screws, carefully wedgeopen it on its hinge. Remove the two steel screws (pic2). The metal piece up that was under the 2 screws(Shown in the center of the photo). The trimmer piece shouldclip can now slide out. You may also want to pullme levered off the blade from the other side but it is not required. Proceed to step 2using a thin screw driver (pic3).

Bild 1

Alte Version

Neue Version

Bild 2

Kein vorheriges Bild

Hinzugefügt

Bild 3

Kein vorheriges Bild

Hinzugefügt