Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von lf -

Bearbeitung genehmigt von Sam Goldheart

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] You don't need any special tools. After removing the two screws in the previous step: hold the body groombodygroom in one hand, buttons up, foil end towards you, with your thumb on the rubber buttons. Just push forward with your thumb and the chrome plastic front panel will slide forward 3mm easily. You can now take it off. No need to break any plastic tabs.
[* black] There are 4 sets of 2 tabs but this information is fairly irrelevant.
[* red] 2 tabs at the very bottom on along the edge (marked in the first picture)
[* orange] 2 tabs at the very top on along the top edge (not marked in picture)
[* yellow] 2 tabs at the bottom on the inside (marked in the first picture)
[* green] 2 tabs near the top on the inside (marked in the 2nd picture)
[* black] You don't need any special tools. After removing the two screws in the previous step: hold the body groombodygroom in one hand, buttons up, foil end towards you, with your thumb on the rubber buttons. Just push forward with your thumb and the chrome plastic front panel will slide forward 3mm easily. You can now take it off. No need to break any plastic tabs.
[* black] There are 4 sets of 2 tabs but this information is fairly irrelevant.
[* red] 2 tabs at the very bottom on along the edge (marked in the first picture)
[* orange] 2 tabs at the very top on along the top edge (not marked in picture)
[* yellow] 2 tabs at the bottom on the inside (marked in the first picture)
[* green] 2 tabs near the top on the inside (marked in the 2nd picture)

Bild 1

Alte Version

Neue Version

Bild 2

Gelöscht