Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von dcinsd -

Bearbeitung abgelehnt von Evan Noronha

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Using the iSesamo or Spudger, carefully pry off the plasticThe plastic chrome cover (button side) slides toward the trimmer side to release the tabs once the screws have been removed.
[* black] Using the iSesamo or Spudger, carefully pry off the plasticThe plastic chrome cover (button side) slides toward the trimmer side to release the tabs once the screws have been removed.
[* black] There are 4 sets of 2 tabs:
[* red] 2 tabs at the very bottom on along the edge (marked in the first picture)
[* orange] 2 tabs at the very top on along the top edge (not marked in picture)
[* yellow] 2 tabs at the bottom on the inside (marked in the first picture)
[* green] 2 tabs near the top on the inside (marked in the 2nd picture)
[* icon_caution] This part can be difficult/frustrating. Just keep workingOnce the two screws in step one are removed, both sides of the unit (silver side with buttons and use medium forcereverse side) slide towards the cutting block (yellow boxes) and can be removed without the need to poppry. Attempting to pry the panels can cause the tabs to break off.
[* icon_caution] This part can be difficult/frustrating. Just keep workingOnce the two screws in step one are removed, both sides of the unit (silver side with buttons and use medium forcereverse side) slide towards the cutting block (yellow boxes) and can be removed without the need to poppry. Attempting to pry the panels can cause the tabs to break off.