Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von lf -

Bearbeitung genehmigt von Evan Noronha

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Remove LED Board
[* black] A smallRemove tape that holds LED board. The LED board with surface mount LEDs (the charging/low battery lights) is taped to the batteries. Peel off the tapebattery assembly.
[* icon_caution] Three wires or a ribbon cable connect this board - be careful not to bend these wires - '''they break easily
and freeit's almost impossible to get to them.''' I suggest you tape where they join to the LED boardmain board while you work on it so they don't keep bending back and forth.
[* black] A smallRemove tape that holds LED board. The LED board with surface mount LEDs (the charging/low battery lights) is taped to the batteries. Peel off the tapebattery assembly.
[* icon_caution] Three wires or a ribbon cable connect this board - be careful not to bend these wires - '''they break easily
and freeit's almost impossible to get to them.''' I suggest you tape where they join to the LED boardmain board while you work on it so they don't keep bending back and forth.