Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 9

Bearbeitet von lf -

Bearbeitung genehmigt von Sam Goldheart

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Swap Batteries
[* black] Replace the batteries with (2) AAA Ni-MH rechargeable batteries
[* icon_caution] Make sure to correctly align the polarity of the batteries, as noted on the housing! '''If your batteries get hot all of a sudden, it is because you are shorting them or have wired them wrongly.'''
[* icon_caution] Make sure to correctly align the polarity of the batteries, as noted on the housing! '''If your batteries get hot all of a sudden, it is because you are shorting them or have wired them wrongly.'''
[* black] Put the metal tabs and connector on the new batteries
[* icon_note] The wires/connectors can be held in place by pressure from the batteries (or optionally soldered)
[* icon_note] The batteries my body groom were actually flat at both ends and therefore 2mm shorter than normal AAA size. This made it impossible to fit the new ones which had the normal nob on the positive terminal. I got around this by chopping the nobs off the batteries with a pair of side cutters (a rather desperate measure that seems to have worked).