Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 11

Bearbeitet von lf -

Bearbeitung genehmigt von Evan Noronha

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Put it back togetherMake contact!
[* black] PushAlign the electronics back in (buttons upbattery housing and circuit board.
[* black] Take note of where the
spring contacts resting onwill connect to the charging pins). Reassemblepins, where the unit. Testgrooves will connect to the unit before replacing the chrome covermotor contacts at each end.
[* black] With all wires clear it should push and pop in quite easily. If the unit does not charge properly, the battery holder may not be making contact with the charging pins that can be seen on the sides of the unit. Ensure that the battery compartmentit is seated completely and thatat all difficult something is in the two metal pins/arms are clean and making a solid connection.
[* black] If either the trimmer or shaver does
way. Do not come on,force - take it may be that the batteries need charging OR the metal contacts are bent causing them to not connect. Take electronics out, inspect contactsout and try again.
[* black] Congratulations on your new, long lasting unit!
have a look.
[title] Put it back togetherMake contact!
[* black] PushAlign the electronics back in (buttons upbattery housing and circuit board.
[* black] Take note of where the
spring contacts resting onwill connect to the charging pins). Reassemblepins, where the unit. Testgrooves will connect to the unit before replacing the chrome covermotor contacts at each end.
[* black] With all wires clear it should push and pop in quite easily. If the unit does not charge properly, the battery holder may not be making contact with the charging pins that can be seen on the sides of the unit. Ensure that the battery compartmentit is seated completely and thatat all difficult something is in the two metal pins/arms are clean and making a solid connection.
[* black] If either the trimmer or shaver does
way. Do not come on,force - take it may be that the batteries need charging OR the metal contacts are bent causing them to not connect. Take electronics out, inspect contactsout and try again.
[* black] Congratulations on your new, long lasting unit!
have a look.