Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 4

Bearbeitet von Brett -

Bearbeitung genehmigt von Brett

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* icon_caution] If you wish to go any further, please do so at your own risk. I have not gone further than this. If you want me to go further and add more pictures and steps, please let me know.
[* icon_note] The sides come apart. There are two latches for each panel. One side has a latch which is directly next to the motherboard. Again, be careful.
[* black] Use your fingers or a flat head to unhook them.
[* icon_note] There are two screws that hold the PCB in place. One is longer than the other. The SHORT one goes to where I am pointing.
[* icon_caution] GENTLY wiggle the ribbon cable that I am pointing at out of its slot. Next to the ribbon cable is the USB power cable. Unplug that as well.
[* black] Now lift the PCB out along with the scroll wheel. There should be some more screws which hold the metal to the plastic. Undo those if you want to.

Bild 1

Kein vorheriges Bild

Hinzugefügt

Bild 2

Kein vorheriges Bild

Hinzugefügt

Bild 3

Kein vorheriges Bild

Hinzugefügt