Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von John Udall -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] When placing the keys back into the faceplate you have to make sure that they are going in the right direction.
-[* yellow] You can tell which way is up by a semicircular extrusion on the back of a key. If this extrusion is on the left half of the key then the key is facing up.
-[* green] The gray and blue keys have the extrusion on the upper right hole.
-[* violet] The black keys on the other hand have the extrusions on the lower right hole.
+[* yellow] You can tell which way is up by a semicircular extrusion on the back of a key.
+[* green] The gray and blue keys have the extrusion on the upper left hole looking at the back of the key.
+[* violet] The black keys on the other hand have the extrusions on the lower left hole looking at the back of the key.