Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Andrew Optimus Goldheart -

Bearbeitung genehmigt von Andrew Optimus Goldheart

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* icon_note] For the next step, you'll need to apply your iOpener directly to the broken glass left adhered to the iPad.
[*
black] Insert wisdom hereTo protect your iOpener from the glass and keep it from filling with glass dust, stick some masking tape to one side.
[* black] Heat the iOpener and apply it to one edge of the iPad, directly on top of the pieces of glass that are still adhered to the rear case of the iPad.
[* black] Leave the iPad there for at least 90 seconds, to soften the adhesive holding these small pieces in place.
[* icon_caution] Be careful not to touch or otherwise disturb the LCD
.
[* icon_note] For the next step, you'll need to apply your iOpener directly to the broken glass left adhered to the iPad.
[*
black] Insert wisdom hereTo protect your iOpener from the glass and keep it from filling with glass dust, stick some masking tape to one side.
[* black] Heat the iOpener and apply it to one edge of the iPad, directly on top of the pieces of glass that are still adhered to the rear case of the iPad.
[* black] Leave the iPad there for at least 90 seconds, to soften the adhesive holding these small pieces in place.
[* icon_caution] Be careful not to touch or otherwise disturb the LCD
.