Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 8

Bearbeitet von iRobot -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Clean the White Rollers in the Assembly.
[* icon_note] I cleaned my roller before taking this picture, your rollers are likely much dirtier.
[* icon_reminder] When reassembling the Assembly, be extra careful as to not bend the little legs on the ball's cradle. The Rollers are placed back with the back wheel end touching the metal tabs.
[* black] Reassemble the mouse back but before gluing the bezel back, test the mouse and especially the wheel to make sure everything works fine. If you have a wheel problem, it is very likely you bent one of these tiny legs. If that is the case, simply disassemble the wheel cradle again and put it back even more carefully.
[* icon_reminder] When reassembling the Assembly, be extra careful as to not bend the little legs on the ball's cradle. The Rollers are placed back with the back wheel end touching the metal tabs.
[* black] Reassemble the mouse back but before gluing the bezel back, test the mouse and especially the wheel to make sure everything works fine. If you have a wheel problem, it is very likely you bent one of these tiny legs. If that is the case, simply disassemble the wheel cradle again and put it back even more carefully.