Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 8

Bearbeitet von David Hodson -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Insert a spudger between the back and front casingcase of the display assembly.
[* black] Using the spudger,
assembly, and peel the two ribbon cables off the two adhesive pads along the back casingcase of the display assembly.
[* icon_notered] The second picture shows the location of the pads on the back casingcase is shown. The top left corner of the case is the corner of the phone shown in the first picture.
[* black] Insert a spudger between the back and front casingcase of the display assembly.
[* black] Using the spudger,
assembly, and peel the two ribbon cables off the two adhesive pads along the back casingcase of the display assembly.
[* icon_notered] The second picture shows the location of the pads on the back casingcase is shown. The top left corner of the case is the corner of the phone shown in the first picture.

Bild 1

Alte Version

Neue Version