Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 2

Bearbeitet von Cole Ankney -

Bearbeitung genehmigt von Cole Ankney

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Remove yellow cables
[* red] Use a spudger tool to release the black clipclips on the two ZIF connectors holding the flat, yellow ribbon cable in place.
[* black] Use the tweezers to pull the flat, yellow ribbon cable out of its connectors.
[* orange] Use tweezerthe tweezers to disconnect the battery connector from the motherboardcircuit board.
[* yellow] Use aUsing the spudger to prytool again, pry up and release the connectors onat the ends of the flat, orange ribbon cable.
[* black] Remove the flat, orange ribbon cable.
[* red] Use a spudger tool to release the black clipclips on the two ZIF connectors holding the flat, yellow ribbon cable in place.
[* black] Use the tweezers to pull the flat, yellow ribbon cable out of its connectors.
[* orange] Use tweezerthe tweezers to disconnect the battery connector from the motherboardcircuit board.
[* yellow] Use aUsing the spudger to prytool again, pry up and release the connectors onat the ends of the flat, orange ribbon cable.
[* black] Remove the flat, orange ribbon cable.