Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 1

Bearbeitet von John -

Bearbeitung genehmigt von John

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Opening up Nifty MiniDrive
[* black] We are taking apart the new Nifty MiniDrive Pro. FindMiniDrive. First find the sonic weld where the front and back plastic pieces are fused together this is the easiest point to open, you will need a razor blade or an exactXacto knife. In it 1stStart at the MicroSD port cut down the weld to the to metal end cap.
[* black] Then up from the MicroSD port and around the top. Try to cap then alongsay on the sonic weld, run razor all the way around the top weldcard.
[* black] We are taking apart the new Nifty MiniDrive Pro. FindMiniDrive. First find the sonic weld where the front and back plastic pieces are fused together this is the easiest point to open, you will need a razor blade or an exactXacto knife. In it 1stStart at the MicroSD port cut down the weld to the to metal end cap.
[* black] Then up from the MicroSD port and around the top. Try to cap then alongsay on the sonic weld, run razor all the way around the top weldcard.
[* black] Last run blade down between the front and back plastic to break weld at bottom that holds end-cap in place.
[* black] Once you remove the top case you will have to remove the circuit cardaperture chip, which is very tricky and requires an amount of pulling andand, for me, some breaking of the back paneling along the top.
[* black] Nifty's redesigned cap and mold make for easy end cap removal after top plastic mold The Chip is removed.set into the plastic at the base of the card
[* black] Once you remove the top case you will have to remove the circuit cardaperture chip, which is very tricky and requires an amount of pulling andand, for me, some breaking of the back paneling along the top.
[* black] Nifty's redesigned cap and mold make for easy end cap removal after top plastic mold The Chip is removed.set into the plastic at the base of the card