Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 3

Bearbeitet von John -

Bearbeitung genehmigt von John

Vorher
Nachher
Unverändert

Schritt-Zeilen

[*title] Opening TarDisk MiniDrive
[* black] TarDisk Teardown is similar the sonic weld is on the front edges of the card (nifty was oncard. Work a razor blade or exact knife along the side) Endweld from cap is similar in creationto MicroSD port opening.
[* black] Next Run blade along top weld and right side. It is easyhelpful to removerun razor down from top once top plasticcard is popped off.
[* black] The circuit chip in the TarDisk is very easyopened to remove it's heldbreak sonic weld holding cap in place by the mold it sits in. Held bu mold walls and a small circular peg in the plastic mold that goes through the chip. Just lift the chip out.
[* black] Next we will examine both cards and their components side by sideTop should remove in one piece.
[*title] Opening TarDisk MiniDrive
[* black] TarDisk Teardown is similar the sonic weld is on the front edges of the card (nifty was oncard. Work a razor blade or exact knife along the side) Endweld from cap is similar in creationto MicroSD port opening.
[* black] Next Run blade along top weld and right side. It is easyhelpful to removerun razor down from top once top plasticcard is popped off.
[* black] The circuit chip in the TarDisk is very easyopened to remove it's heldbreak sonic weld holding cap in place by the mold it sits in. Held bu mold walls and a small circular peg in the plastic mold that goes through the chip. Just lift the chip out.
[* black] Next we will examine both cards and their components side by sideTop should remove in one piece.