Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Nick -

Bearbeitung genehmigt von Nick

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] First, remove theRemove the faceplate from the 360.
[* black] Just grab
system. Grab a part fromof the topfaceplate, and pull, it wont break. Remove the faceplate as shown on the first picture
[* yellow] The holograph sticker is the warranty seal. If you value your warranty, don't break
it as you can '''NEVER SEND IT TO MICROSOFT AGAIN!'''should come off.
[* black] First, remove theRemove the faceplate from the 360.
[* black] Just grab
system. Grab a part fromof the topfaceplate, and pull, it wont break. Remove the faceplate as shown on the first picture
[* yellow] The holograph sticker is the warranty seal. If you value your warranty, don't break
it as you can '''NEVER SEND IT TO MICROSOFT AGAIN!'''should come off.

Bild 3

Alte Version

Neue Version