Änderungen an Schritt Nr. 4
Bearbeitet von 040304 -
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
[* black] 1.) Take the good end of the existing wire and strip it. |
[* black] 2.) The interior wire, which is coated in white should be soldered on a square metal plate about one eighth inch square. This plate is opposite a small chip for reference. |
[* black] 3.) The braided wire coats the white interior wire, and is wrapped around it in two different directions. This wire should be peeled off and then twisted together. |
[* black] 4.) Then solder it in place opposite the chip and the other wire. |
Bild 1
Kein vorheriges Bild
Hinzugefügt