Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Alan Abelson -

Bearbeitung genehmigt von Alan Abelson

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Open the controller
[* black] Turn the controller over, exposing the three screws on the backback (marked by the orange circles). Use a 6mm screwdriver to remove these screws.
[* black] Turn the controller over, exposing the three screws on the backback (marked by the orange circles). Use a 6mm screwdriver to remove these screws.
[* black] Carefully slide and pull the two parts of the controller shell apart, exposing the innards.
[* icon_caution] Try not to move the joystick when reassembling. This will almost assuredly break your alignment. The less the joystick is moved, the easier it will be to realign the joystick to the pots.

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version