Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Shiva Empranthiri -

Bearbeitung genehmigt von Shiva Empranthiri

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Remove screw on back of keyboard (labeled do not remove)
[* black] Using a Philips #0 screwdriver, remove the .5cm screw from the back of the keyboard.
[* icon_caution] This will void your warranty!
+[* icon_caution] When inserting the screw after replacing the switch, make sure to not screw in too tight. This may cause erratic behavior with the keyboard.

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version