Änderungen an Schritt Nr. 3
Bearbeitet von Charlie Franklin -
Bearbeitung genehmigt von Charlie Franklin
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [title] Remove metal Hard Drive sled |
| [* icon_note] When handling the hard drive hold it by the sled or sides be sure not to touch the green circuit board visible in all 3 pictures. [* red] Locate the four 5.25mm Phillips head screws on the Hard Drive sled. |
| [* icon_note] When handling the hard drive hold it by the sled or sides be sure not to touch the green circuit board visible in all 3 pictures. [* red] Locate the four 5.25mm Phillips head screws on the Hard Drive sled. |
| [* black] Using a Phillips head screw driver remove the four screws and separate the metal sled from the Hard Drive |