Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Brett Hartt -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Using the flat end of a spudger, flip up the retaining flap on the UNKNOWN cable ZIF connector.
-[* black] With the pointed end of the spudger, pull the UNKNOWN cable from its connector on the logic board.
+[* black] Using the flat end of a spudger, flip up the retaining flap on the INVERTER cable ZIF connector.
+[* black] With the pointed end of the spudger, pull the INVERTER cable from its connector on the logic board.