Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Melissa Pavelka

Bearbeitung genehmigt von Marty Rippens

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Carefully peel back the two copper sticky grounding strips near the LED module.
[* black] Swing the outer aluminium case up and carefully slide it towards the connector side of the logic board until it comes off. Remove the two Phillips #0 screws securing the LED module.
[* black] Carefully unplug the module from the logic board to make it easier to work on, and remove it from the case.
[* black] Carefully unplug the module from the logic board to make it easier to work on, and remove it from the case.