Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Melissa Pavelka

Bearbeitung genehmigt von Marty Rippens

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] There are two miniature SMD LEDs, oneLEDs. One is clear and one is yellow. Unsolder the yellow coloured LED, which is actually the white one - the clear SMD LED is amber when on. ReplaceYELLOW colored LED. Replace with another high intensity SMD LED. I used a blue one to match my other hi-fi components. The anode (+) is marked on the circuit board and is away from the infrared receiver side.
[* icon_note] SMD LEDs are difficult to find as a spare part. You can carefully ground down a normal sized LED with a Dremil until it is the correct fit.
[* black]
Reassemble is a simple reversal being surethe Apple TV following the reverse of these to remembersteps used to reverse every stepdisassemble it.
[* black] There are two miniature SMD LEDs, oneLEDs. One is clear and one is yellow. Unsolder the yellow coloured LED, which is actually the white one - the clear SMD LED is amber when on. ReplaceYELLOW colored LED. Replace with another high intensity SMD LED. I used a blue one to match my other hi-fi components. The anode (+) is marked on the circuit board and is away from the infrared receiver side.
[* icon_note] SMD LEDs are difficult to find as a spare part. You can carefully ground down a normal sized LED with a Dremil until it is the correct fit.
[* black]
Reassemble is a simple reversal being surethe Apple TV following the reverse of these to remembersteps used to reverse every stepdisassemble it.