Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Melissa Pavelka

Bearbeitung genehmigt von Marty Rippens

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] There are two miniature SMD LEDs. One is clear and one is yellow. Unsolder the YELLOW colored LED. Replace with another high intensity SMD LED. The anode (+) is marked on the circuit board and is located away from the infrared receiver side.
[* black] There are two miniature SMD LEDs. One is clear and one is yellow. Unsolder the YELLOW colored LED. Replace with another high intensity SMD LED. The anode (+) is marked on the circuit board and is located away from the infrared receiver side.
[* icon_note] SMD LEDs are difficult to find as a spare part. You can carefully ground down a normal sized LED with a Dremil until it is the correct fit.
[* black] Reassemble the Apple TV following the reverse of these to steps used to disassemble it.