Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 14

Bearbeitet von Nicholas Van Beek -

Bearbeitung genehmigt von Nicholas Van Beek

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Making the Glass Screen Stick Again
[* icon_note] If you bought a full LCD and Digitizer assembly, then you can discard the old Digitizer and just replace it with the new one. If you only bought the LCD component and would like to reuse the current digitizer then follow the steps below.
[* black] Peel off the excess adhesive from the bezel of the glass screen.
[* black] Line the bezel of the glass screen with 3M double sided adhesive tape. You will be able to stick it back on after replacing the LCD screeneasily.
[* black] Line the bezel of the glass screen with 3M double sided adhesive tape. You will be able to stick it back on after replacing the LCD screeneasily.