Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Haley Sweet -

Bearbeitung genehmigt von Haley Sweet

Vorher
Nachher
Unverändert

Schritt-Zeilen

+[title] Remove Cutter Blade
+[* black] Apply a small amount of pressure on the cutter blade unit pushing it in the direction shown in the photo.
+[* black] When the cutter blade loosens use your thumb and forefinger to remove the cutter blade unit by pulling it up.
+[* icon_caution] Be very careful when pulling out the cutter blade, it is very sharp.
+[* icon_note] The Brother no. TL 5 Cutter Blade Unit is required for replacement.