Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 10

Bearbeitet von Jim Kearney -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Here's a closeup of the Studio II's RF modulator. The power supplysupply also comes in through this cable and is separated here.
[* black] Here's a closeup of the Studio II's RF modulator. The power supplysupply also comes in through this cable and is separated here.
[* icon_note] It is interesting to note that all the components attached to the circuit board are through-hole. Although surface-mount technology had existed since the '60s, it was still more expensive than the commonly available through-hole components of the day.
[* black] The pattern for the traces connecting components across the board is most definitely hand-drawn. This was very common before computer-aided design programs were used to make very straight, organized traces. Most of the wide solder areas are the ground plane.
[* black] The pattern for the traces connecting components across the board is most definitely hand-drawn. This was very common before computer-aided design programs were used to make very straight, organized traces. Most of the wide solder areas are the ground plane.