Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 6

Bearbeitet von Miroslav Djuric -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Speaking of the I/O cable, here's the Studio II's RF switch.
[*[* icon_note] The Studio II has no power button on the unit; instead, it employs a ~~convoluted~~ unique method of powering itself. DCon. When you select "Console Cord" on the RF switch, power is fedgoes into the RF switch such that when the Studio II is selected, power is simultaneously fed into the console whileand data is fed back intoto the TV set. When you select the antenna is selected,"Antenna" on the RF switch simply connects a pair of rabbit ears or anotherswitch, the unit powers off and your antenna signal is routed to the television set.
[*[* icon_note] The Studio II has no power button on the unit; instead, it employs a ~~convoluted~~ unique method of powering itself. DCon. When you select "Console Cord" on the RF switch, power is fedgoes into the RF switch such that when the Studio II is selected, power is simultaneously fed into the console whileand data is fed back intoto the TV set. When you select the antenna is selected,"Antenna" on the RF switch simply connects a pair of rabbit ears or anotherswitch, the unit powers off and your antenna signal is routed to the television set.
[* black] And inside the RF switch? Some capacitors and inductors that were undoubtedly hand-assembled.