Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 5

Bearbeitet von jadeters -

Bearbeitung genehmigt von jadeters

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Remove the control unit by very gently prying up the two outside tabs that hold it to the top crossbar with a flat bladed screwdriver and simultaneously sliding the control unit toward the front of the washer.
[* black] Remove the control unit by very gently prying up the two outside tabs that hold it to the top crossbar with a flat bladed screwdriver and simultaneously sliding the control unit toward the front of the washer.
[* icon_note] Only the outer two tabs have a locking notch holding the control unit to the crossbar. The middle tab is there just for support.
[* black] Open the gray housing of the control unit by gently prying the side tabs open.
[* black] Remove the circuit board the same way, by gently prying open the tabs holding it down.