Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Brett Hartt -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Insert wisdom here.
+[* black] Using the flat end of a spudger, pry the left speaker out of its socket on the front bezel.
+[* black] De-route the speaker cable along the top edge of the screen.
+[* icon_note] Work carefully and slowly, holding onto the wire and not the speaker itself. The solder joints may break if pulled on too hard.
+[* black] In the same manner described above, remove the right speaker from its socket on the front bezel.
+[* black] Place both speakers on the back of the upper LCD.