Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Andrew Optimus Goldheart -

Bearbeitung genehmigt von Andrew Optimus Goldheart

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Use a PH1 screwdriver to remove the the two captive Phillips #1 screws on the back of the device.
-[* black] Gently separate the rear case from the rest of the device.
+[* black] Loosen the two captive Phillips #1 screws on the back of the device.
+ [* icon_note] These captive screws will conveniently stay in the rear cover, so don't try to remove them.
+[* black] Prying from the thumb slots on each side, pull the rear panel off the back of the device.