Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Miroslav Djuric -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* red] Use a 1/4" drive 8 mm deep socket to remove the three hex bolts securing the distributor cap to the engine.
+[* red] Use a 1/4" drive, 8 mm deep socket to remove the three hex bolts securing the distributor cap to the engine.
[* icon_note] The position of the third bolt is not visible in the second picture.