Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 7

Bearbeitet von Evan Noronha -

Bearbeitung genehmigt von Evan Noronha

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Use a soldering iron and solder wick to desolder the four motors and four LEDs from the control board.
[* black] CAUTION: Overheating the PCB can damage the traces, making it difficult or impossible to reconnect the components later on. Do not apply too much heat to the board; these traces are especially delicate due to their size.