Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 8

Bearbeitet von Evan Noronha -

Bearbeitung genehmigt von Evan Noronha

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Desolder LEDs from Flight Controller
[* black] Using a technique similar to desoldering the motor wires, disconnect the LEDs from the control board.
[* icon_note] The LED connections use less solder than the motor joints, so solder wick is optional but not required for this step.
[* icon_reminder] When reassembling the quadcopter, remember the LED's have red positive leads and bronze negative leads.