Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Seth York -

Bearbeitung genehmigt von Seth York

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Flip your device so that the long side without the buttons is facing you.
[* black] Insert the Plastic Opening Tool between the silver back plate and the screen about 1 inch from corner of the device on either side.
[* black] Jimmy the Plastic Opening Tool until the screen unsnaps from the back plate.
[* black] Work your way down the edge of the device, popping out all 4 locations where the screen snaps in to the silver back plate.
[* black] Go around the corners with the Plastic Opening Tool and unsnap additional snap-in locations as necessary.
[* icon_caution] Once the screen loose, pull it towards you then lift it off to prevent damage to the buttons on the other side of the device.